Guide Design and Stent Production

coDiagnostiX™ supports digital drill guide design and fabrication directly through your local laboratory. In five simple design steps you can create an accurate drill guide.

The software allows you to create soft tissue or bone-supported drill guides. It is also possible to design drill guides with a combination of tooth and bone support.

Contact Tech Support on 08000 288 267 to connect to a coDiagnostiX Producer Lab.  

Guide Sleeves

Straumann Guide Sleeves are available in three diameters, for different drilling protocols and tooth positions:

  • 2.2mm
  • 2.8mm
  • 5.0mm

Guide Sleeve